Welding Settings - Kuhtreiber KITin 1500 HF RS Bedienungsanleitung

Welding settings

Using the MET control button is selected the welding
method. Pressing the button repeatedly switches wel-
ding methods.
MMA
This method is intended for welding with coated
electrodes for CrNi, Al alloys and steel materials.
TIG HF
This method is designed for welding CrNi and steel ma-
terials with DC current. It also allows soldering of ma-
terials.
TIG LA
This method is designed for welding CrNi and steel ma-
terials with DC current. It also allows soldering of mate-
rials. It must be used in places where it is not possible
to use the HF contactless ignition.
PRESS PRESS
MMA method
Setting the welding current
Setting the welding current is done by n-encoder. The
main welding current is set at position I
chine position is always in the Iw position. When you fi-
nish setting the other functions of the method, it auto-
matically switches to the default position automatically
MMA method
Setting the welding
current
Setting the SOFT START function
The function allows the setting of a smooth flow to
the welding current. The function value determines
the ignition current. Suitable for use in weak materials,
for example, and to reduce the initial load of the cir-
cuit breaker. For correct operation must be set to the
desired rise time. If the duration is 0, the function is
inactive.
PRESS
. The basic ma-
w
Control encoder
Setting the SOFT START TIME function
(duration)
The function allows you to set the flow time for the wel-
ding current.
Setting up HOT START (easier ignition)
The function allows setting the welding current in-
crement value when the welding arc is ignited. The
function facilitates the ignition of the welding arc. The
required duration must be set to the correct operation.
If the duration is 0, the function is inactive.
EN
| 37