Herunterladen Inhalt Inhalt Diese Seite drucken

Nilfisk-Advance 3156 Betriebsanleitung Seite 38

Inhaltsverzeichnis

Werbung

3156 - 3156 L, M, H
3306 - 3306 L, M, H
Montaggio
- Applicare al nuovo filtro il
fermafiltro e l'anello di tenuta
smontati dal vecchio filtro.
- Introdurre la gabbia "I" ed an-
corarla al filtro mediante le
fascette "L" esistenti sul fondo
del filtro.
- Inserire il filtro all'interno della
camera filtrante, quindi mon-
tarvi il coperchio "E" e bloccar-
lo mediante i due ganci di chiu-
sura "D".
- Montare il pomello scuotifiltro
e bloccarlo in posizione ab-
bassata dall'arresto in modo
da mantenere il filtro sempre
teso.
- Rimontare il tubo di aspirazio-
ne sul bocchettone inferiore.
Smaltire il filtro in accordo con la
legislazione in vigore.
Downloaded from
www.Manualslib.com
Assembly
- Fit the filter catch and retention
ring of the old filter on to the new
one.
- Insert cage "I" and fix it to the
filter by means of plastic clamps
"L" on the bottom of the filter
itself.
- Fit the filter into filtering cham-
ber then mount lid "E" and lock
it in place with the two fasten-
ing latches "D".
- Fit the filter shaker knob and
lock it in the lowered position
by means of the stop so that
the filter is kept stretched.
- Fit the suction hose on the
lower outlet.
Dispose of the filter in accord-
ance with the laws in force.
manuals search engine
Tous droits réservés / Alle Rechte vorbehalten
Montage
- Appliquez le fixe-filtre sur le
nouveau filtre ainsi que l'an-
neau démontés de l'ancien fil-
tre.
- Montez la cage "I" et fixez-la
au filtre au moyen des colliers
"L" placés sur le fond du filtre.
- Replacez le filtre à l'intérieur
de la chambre filtrante, puis le
couvercle "E" et bloquez avec
les deux crochets "D" de fer-
meture.
- Montez le pommeau de
secouage du filtre et bloquez-
le dans la position abaissée
par la sûreté de manière à
maintenir le filtre toujours tendu.
- Remontez le tuyau d'aspira-
tion sur l'embout inférieur.
Eliminer le filtre conformément
à la législation en vigueur.
-32-
Tutti i diritti riservati / All rights reserved
Einbau
- Am neuen Filter die Filter-
arretierung und den Dichtungs-
ring montieren, die man am
alten Filter abmontiert hat.
- Den Käfig "I" einführen und mit
den Stulpen "L" am Filterboden
am Filter befestigen.
- Den Filter in die Filterkammer
legen und den Deckel "E" dar-
auf montieren, um ihn mit den
beiden Verschlußhaken "D" zu
blockieren.
- Den Ballengriff zum Filter-
rütteln montieren und in der
gesenkten Stellung der Arre-
tierung blockieren, um den Fil-
ter immer gespannt zu halten.
- Den Saugschlauch wieder auf
dem unteren Stutzen montie-
ren.
Den Filter gemäß den geltenden
Rechtsvorschriften entsorgen.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis