Denon AVR-1602 Bedienungsanleitung Seite 18

ENGLISH
DSP surround simulation
• To operate the surround mode and surround parameters from the remote control unit.
1
Select the surround mode for the input channel.
SURROUND
MODE
(Remote control unit)
The surround mode switches in the following
order each time the SURROUND MODE button
is pressed:
STEREO DOLBY PRO LOGIC
MONO MOVIE ROCK ARENA
VIRTUAL
MATRIX
SURROUND
2
To enter the surround parameter setting mode, press the SURROUND button.
SURROUND
• The surround parameter switches in the following order each time the
MENU
SURROUND button is pressed for the different surround modes.
(Remote control unit)
3
Display the parameter you want to adjust, then use the
(right) buttons to set it.
(1) ROOM SIZE
Use the
(Remote control unit)
ROOM SIZE MED
(2) EFFECT LEVEL
Use the
(Remote control unit)
EFFECT LEVEL 10
(3) DELAY TIME
Use the
(Remote control unit)
18
Downloaded from www.Manualslib.com
OFF 1
V. AUX VCR
4 5
INPUT MODE CDR / TAPE
8 9
SURROUND
TAPE
MODE
1
6
0
3 2
VIDEO SELECT CD·MD/CDR·DVD/VDP
TITLE
8
6
2
SYSTEM
5CH STEREO
SET UP
CH SELECT
3
JAZZ CLUB
SELECT
T.TONE
RETURN
VIDEO GAME
• ROCK ARENA
• JAZZ CLUB
• VIDEO GAME
• MONO MOVIE • MATRIX
ROOM SIZE DELAY
EFFECT DEFAULT
DEFAULT
(left) and (right) buttons to set the room size.
(Initial)
SMALL MED-S MED
(left) button
(left) and (right) buttons to set the effect level.
(Initial)
1 10
(left) button (right) button
(left) and (right) buttons to set the delay time.
(Initial)
0ms 30ms 110ms
DELAY 30ms
(left) button (right) button
manuals search engine
(4) DEFAULT
(Remote control unit)
CD DVD/VDP
2 3
TV/DBS
6 7
TUNER SHIFT
0
· VCR
7
CHANNEL
0
NOTE:
DISC SKIP+
• When making parameter settings, the display will return to the regular condition several seconds after the
3 9
last button was pressed and the setting will be completed.
2
7
SURROUND
MENU
MASTER
VOL
• Operating the surround mode and surround parameters from the main unit's panel.
STATUS MUTING
DISPLAY
1
Press the SELECT buttons to select the surround
mode.
• VIRTUAL
• When press the UP button
EFFECT
STEREO
DEFAULT
VIRTUAL SURROUND
• When press the DOWN button
STEREO
(left) and VIRTUAL SURROUND
To select the surround mode while adjusting the surround parameters, channel volume or tone control,
press the SURROUND MODE button then operate the selector.
MED-L LARGE
2
Press the SURROUND PARAMETER button.
(right) button
Press and hold in the surround parameter button to select the parameter you want to set.
• The parameters which can be set differ for the different surround modes. (Refer to "Surround Modes and
Parameters" on page 19.)
15
3
Display the parameter you want to adjust, then press the SELECT UP/DOWN buttons to set it.
NOTE:
• When playing PCM digital signals or analog signals in the 5CH STEREO, ROCK ARENA, JAZZ CLUB, VIDEO
GAME, MONO MOVIE or MATRIX surround modes and the input signal switches to a digital signal encoded
in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches to a DTS
signal, the mode automatically switches to DTS surround.
To reset the settings to the factory defaults, use the
buttons to display "Yes".
YES
DEFAULT Y/N
(left) button
B
(Main unit)
DOLBY PRO LOGIC 5CH STEREO MONO MOVIE
MATRIX VIDEO GAME JAZZ CLUB
DOLBY PRO LOGIC 5CH STEREO MONO MOVIE
MATRIX VIDEO GAME JAZZ CLUB
(Main unit)
(Main unit)
(left) and (right)
NO
(right) button
1 2 1, 3
ROCK ARENA
ROCK ARENA