Ir Remote Control; Turning On The Power - Eneo DLR5-08 Schnellinstallationsanleitung

IR Remote Control

Turning on the Power

Connecting the power cord to the DVR turns on the unit. The unit takes approxi-
mately 50 seconds to initialize.
40
Downloaded from www.Manualslib.com manuals search engine
ID Button on Remote Control
If a DVR System ID is set to 0, the
infrared remote control will control
that DVR without any additional op-
erations. If the system ID is 1 to 16,
you must to press the ID button on
the remote control and then press
the number button (1 to 16) in order
to control that DVR. If the System
ID of two or more DVRs is set to 0,
those DVRs will react to the infrared
remote control at the same time.
BOOKMARK Button on Remote
Control
When in the playback mode,
pressing the BOOKMARK button
adds the current playback point to
the bookmark list or moves to the
registered bookmark point.