Video Input; Video Loop Through; Audio In/Out - Eneo DLR5-08 Schnellinstallationsanleitung

① Video Input

② Video Loop Through

③ Audio In/Out

④ eSATA Port
⑤ Alarm Input/Output
⑥ RS485 Port
Video Input
Connect the coaxial cables from the video sources to the BNC Video In connectors.
Video Loop Through
If you would like to connect your video source to another device, you can use the
Loop BNC connectors.
Audio In/Out
32
Downloaded from www.Manualslib.com
NOTE: The Loop BNC connectors are auto terminated. Do NOT connect a
cable to the Loop BNC unless it is connected to a terminated device
because it will cause poor quality video.
Your DVR can record audio from up to four sources. Con-
nect the audio sources to Audio In 1, Audio In 2, Audio
In 3 and Audio In 4 as needed using RCA jacks. Connect
Audio Out to your amplifier.
manuals search engine
⑦ RS232 Port
⑧ Factory Reset Switch
⑨ Video Out
⑩ Network Port
⑪ Power Cord Connector