be cool BCP9KL2001F Bedienungsanleitung Seite 28

3. Installation of the hose to a window/balcony
without the window mount
Place the air conditioner near a window or a
balcony door. Adjust the length of the hose to
reach the window/balcony door. Open the
window/balcony door and put the hose out.
Check that the air in the hose can flow freely.
Open the window a little bit and install the
exhaust hose there.
4. Installation of the hose to a window with the
window mount
Place the window mount on/in the window frame
and slide it over the entire window width/heigt, by
taking out the extension rail (A) from the window
mount (B).
Fix the length with the screw (D) to the respective
holes to ensure that there are no gaps in the
assembled window mount and to match the
window perfectly.
Now lower or push the window onto the window
mount.
Insert the exhaust hose into the cutout.
NOTE
If the window opening is smaller than the minimum length oft he window slider set, cut the
window mount without the hole until it fits in the window.
Do not cut into the hole of the window mount.
Seite 28 von 48