Maintenance And Storage - Parkside PLSA 40-Li B1 Originalbetriebsanleitung

sure no metallic objects, stones,
bottles, canisters or other foreign
objects are taken in.
• Do not allow processed material
to accumulate in the ejection
zone since this can prevent
proper ejection and cause the
material to be brought back
into the machine via the in-feed
aperture.
• If the machine becomes
clogged, turn off the power sour-
ce and disconnect the machine
from the mains supply or remove
the batteries before freeing any
refuse.
• Never operate the machine with
defective protective equipment
or shields, or without safety
equipment, e.g. without the coll-
ection bag being connected.
• Keep the power source free of
refuse or other accumulated
material to prevent it from beco-
ming damaged and to avoid a
potential fire.
• Do not transport the machine
while the power source is running.
• If the cutting mechanism co-
mes into contact with a foreign
object or the machine starts to
emit unusual noises or vibrate,
immediately turn off the power
source and wait for the machine
to come to a standstill. Discon-
nect the machine from the mains
supply or remove the batteries
and perform the following steps
before re-starting and operating
the machine:
- investigate for damage;
- replace or repair damaged
parts;
- check for loose parts and tigh-
ten as necessary.
• Ensure that you do not touch any
of the dangerous moving parts
before you have unplugged the
machine from the mains supply
or removed the batteries from
the machine, and that the dan-
gerous moving parts have come
to a complete standstill.
• In the case of an accident
or malfunction during ope-
ration, the device must be
switched off immediately.
Injuries must be properly
treated or medical assis-
tance sought. Read the "Trou-
bleshooting" section to correct
any malfunctions or contact our
Service Centre.

Maintenance and storage:

• Regularly check the functionality
and integrity of the device to
avoid danger to the operator.
• Replace worn or damaged parts
in the interests of safety. Only
use original replacement parts
and accessories.
• Do not try to repair the device
yourself, unless you have profes-
sional training. All work not men-
tioned in these instructions may
only be performed by authorised
service representatives commissi-
oned by us.
• Store the device in a dry place
and out of reach of children.
• Treat your device with care.
Clean the ventilation slits regu-
larly and follow the maintenance
instructions.
• Keep all inlets for the cooling air
free of debris.
GB IE
31