Safety Instructions; Symbols And Icons - Parkside PLSA 40-Li B1 Originalbetriebsanleitung

Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).

Safety instructions

This section describes the basic
safety rules when working with the
device.

Symbols and icons

Bildzeichen auf dem Gerät:
Warning!
Read the manual.
For saftey reasons, make sure
that the safety cover over the
suction opening is securely
mounted!
For safety reasons all three
suction pipe sections must be
correctly mounted before you
can start the device. Make
sure to use the collection bag
in suction mode.
Danger due to materials
blown out of machine!
Remove persons in the
vicinity from the danger area.
Caution.
Rotating impeller wheel.
Keep hands away.
Remove the battery before
maintenance work.
Wear eye protection.
Wear ear protection.
Wear breathing protection.
Wear anti-slip safety shoes.
Keep a safety dis-
tance of at least 5 m
from bystanders.
Do not leave the device in
wet conditions. Do not work
in the rain
Do not wear long hair
uncovered. Use a hair net.
Battery charge level
indicator
Control panel
Guaranteed sound power
level
Electrical appliances must not
be disposed of with the do-
mestic waste.
The device is part of the
Parkside X 20 V TEAM
series.
GB IE
27