Herunterladen Inhalt Inhalt Diese Seite drucken

Hama EWS-200 Bedienungsanleitung Seite 8

Vorschau ausblenden Andere Handbücher für EWS-200:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 10
Display
6.5 Maximum and minimum temperature and humidity
values
• The base station automatically stores the maximum and
minimum indoor/outdoor temperature and humidity values.
• Repeatedly press the DOWN/MEM button (24) to switch
between the current temperature and humidity, minimum
temperature and humidity (MIN) and maximum temperature
and humidity (MAX).
• Press and hold the DOWN/MEM button (24) for approx. 3
seconds to reset the stored maximum and minimum values.
• The maximum and minimum values are automatically deleted
every day at midnight.
6.6 Outdoor temperature alarm
• Repeatedly press the CH button (25) to select the measuring
station channel (7) for which you would like to set an alarm.
• Press and hold the ALERT button (26) for approx. 3 seconds
until the outdoor temperature display (8) begins to ash.
• The symbol for the lower limit value
limit value (8) ashes.
• Press the UP button (23) or the DOWN/MEM button (24)
to set the displayed limit value and con rm your selection by
pressing the ALERT button (26).
• Then repeat this procedure for the upper limit value .
• If you do not make an entry for 30 seconds, the device
automatically exits the settings mode and the settings you
made are saved.
• Repeatedly press the ALERT button (26) to activate/
deactivate the outdoor temperature alarm. The alarm symbol
(20) will appear/not appear.
6.7. Moon phases
The base station indicates the current moon phase (14) with the
following symbols:
Display (14)
6
Trend
Increasing
Constant
Decreasing
is displayed and the
Moon phase
New moon
Waxing crescent
6.8 Comfort range
The base station displays the following comfort ranges based
on the ration between the current room temperature and room
humidity:
Display (6)
6.9 Backlight
Note – Backlight
If you press the SNZ/LIGHT button (27), the display will light
up for approx. 10 seconds.
6.10. Low battery capacity
As soon as the (2/21) battery symbol appears on the display
of the base station, the capacity of the batteries in the base/
measuring station is very low. Replace the batteries immediately.
Waxing half moon
Waxing moon
Full moon
Waning moon
Waning half moon
Waning crescent
Comfort range
– Pleasant –
Ideal temperature and humidity
– Moist –
Humidity too high
– Dry –
Ambient air too dry

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis