Hama EWS-200 Bedienungsanleitung Seite 4

G Operating instruction
Controls and Displays
A Base station
1. Alarm symbol
2. Battery symbol (base station)
3. Summer time
4. Weather forecast symbol
5. Room temperature
6. Comfort range
7. Channel display
8. Outdoor temperature
9. Radio symbol
10. Time
11. Day
12. Month
13. Weekday
14. Moon phase
15. Room temperature trend
16. Room humidity
17. Measuring station radio symbol
18. Outdoor humidity
19. Outdoor temperature trend
20. Outdoor temperature alarm
21. Battery symbol (measuring station)
22. MODE button
= settings/con rm the setting/alarm setting
23. UP button
= increase the current setting/activate or deactivate manual
radio signal reception
24. DOWN/MEM button
= reduces the current setting/accessing the saved
maximum/minimum values
25. CH button
= channel selection/manual search for a signal from the
measuring station
26. ALERT button
= setting/activating/deactivating the outdoor temperature
alarm
27. SNZ/LIGHT button
= stops the alarm/activates the backlight (approx. 10
seconds)
28. Battery compartment
B Measuring station
29. Display (on front side)
= Displays temperature, humidity and current channel.
30. LED indicator (on front side)
= Flashes when signals are transmitted.
31. Opening for wall mounting
32. Set the transmission CHANNEL (1-3)
= Input channel for the weather station. Set the channel
before inserting the batteries.
2
33. Battery compartment
= Unit requires 2 pcs. UM-4 or "AAA" 1.5V batteries.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw
your attention to speci c hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• EWS-200 weather station
(base station for indoors/measuring station for outdoors)
• 4 AAA batteries
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use only.
• Do not operate the product outside the power limits given in
the speci cations.
• Do not use the product in moist environments and avoid
splashes.
• Do not use the product in the immediate vicinity of heaters or
other heat sources or in direct sunlight.
• Do not use the product in areas where the use of electronic
devices is not permitted.
• Only connect the product to a socket that has been approved
for the device. The socket must be installed close to the
product and easily accessible.
• Do not drop the product and do not expose it to any major
shocks.
• Do not open the device or continue to operate it if it becomes
damaged.
• Do not attempt to service or repair the product yourself. Leave
any and all service work to quali ed experts.
• Keep the packaging material out of the reach of children due
to the risk of suffocation.
• Dispose of packaging material immediately according to
locally applicable regulations.
• Do not modify the product in any way. Doing so voids the
warranty.
• Use the product for its intended purpose only.