Resetting Factory Settings; Advanced Settings; Access - Cordivari CLAUDIA BLOWER MISTO 500X763 Betriebsanleitung

4- Press again to exit the PIN code setting mode and return to the
installation settings display.
To exit the installation settings, press

12.4 Resetting factory settings

If PIN code protection is disabled, user and installation settings are reinitia-
lized:
1-From PIN code setting, press
2- is displayed. Press

13.Advanced settings

13.1 Access

The advanced settings are accessed in 5 steps. From Auto, Comfort, Eco or Frost Protection modes:
1 information display
Press for 5
seconds
information display
Cod. 1910000002086 - nv00
twice.
. The display briefl y shows
or to select .
2
Press twice
1
4 4
Press simultaneously for
10 seconds
= Reset to factory settings.
= Cancel reset to factory settings.
3- Press key for 5 seconds. The device returns to its initial confi -
guration and automatically switches to the initial display of installation
settings.
The following factory settings are reset:
.
Settings
Set Comfort temperature
Set Eco temperature
Boost time
Keyboard lock
Backlighting
Frost protection temperature
Maximum Boost time
Maximum ambient temperature for
automatic Boost shutdown
Automatic open window detection
Presence detection
PIN code protection
PIN code numbers
To exit user settings, press
information display
1
5 5
= advanced
settings
Press briefl y
- 37 -
Factory settings
Operation
19°C
15°C
60 min.
Disabled
User settings
L3
7°C
60 min.
39°C
Installation settings
Enabled
Enabled
Disabled
0000
twice.
English
3
Press for 10
seconds