Temperature Setting For Comfort And Eco Modes; Indication Of Accumulated Comsumption In Khw, Energy Saving; Child Protection, Keyboard Lock/Unlock; Integrated Weekly And Daily Program, Energy Saving - Cordivari CLAUDIA BLOWER MISTO 500X763 Betriebsanleitung

English
C - Red
Long Boost period: Boost time >
it is recommended 60 minutes
to signifi cantly When the Boost time
reduce the Boost exceeds 60 minutes
time
B - Orange 30 minutes < boost
Average Boost time ≤ 60 minutes
period: it is recom- When the boost time is
mended to slightly greater than 30 minutes
reduce the Boost and lower than or equal
time to 60 minutes
Boost time
≤ 30 minutes
A - Green
When the Boost time is
Ideal time.
lower than or equal to 30

10.7 Temperature setting for Comfort and Eco modes

• Setting the temperature in Comfort mode
It is possible to access the Comfort temperature set in Auto and Comfort
mode. The default value is 19°C
Use and to adjust the temperature from 16°C to 19°C with 0.5°C
steps.
• Setting the temperature in Eco mode
It is possible to access the Eco temperature set in Eco mode. The default
value is 15°C.
Use and to adjust the temperature from 12°C to 15°C with 0.5°C
steps.
10.8 Indication of accumulated comsumption in Khw, energy
saving
It is possible to display the estimated energy consumption in kWh since the
last energy meter reset.
• Display of estimated energy consumption
Display of estimated energy consumption
display mode: press any button, the device automatically returns to the
previously active mode.
1 2 3 4 5 6 7
minutes
. To exit the consumption
• Resetting the energy meter
To reset the energy meter, from Auto, Comfort, Eco or Frost Protection
mode, proceed as follows.
1- Press .
2- Press and hold simultaneously
To exit the energy meter reset, press any button: the device automatically
returns to the previous active mode.

10.9 Child protection, keyboard lock/unlock

• Keyboard lock
To lock the keyboard, press and hold
the padlock symbol appears on the display: the keyboard is locked.
• Keyboard unlock
To unlock the keyboard, press and hold again
The padlock symbol disappears from the display, the keyboard is unlocked.
Important: When the keyboard is locked, only the power switch is active.
If the device is in Standby mode when the keyboard is locked, it is neces-
sary to unlock it for the next heating or to access the settings.

10.10 Integrated weekly and daily program, energy saving

AUTOMATIC PROGRAMMING WITH SELF-LEARNING PROCESS
• General Information
Auto-programming (Auto): After an initial learning period of one week, the
device analyses the presence cycles to defi ne and implement a weekly
schedule adapted to the lifestyle, alternating Comfort (with automatic
Boost) and Eco periods, with the aim of providing the most effi cient,
comfortable and targeted heating cycle. The algorithm will continue to
learn and adapt to changes in presence rhythms, adjusting itself week
after week to optimize the heating program according to any changes
in rhythm.
• Operation
The fi rst time the device is started, "auto-programming" is automatically
activated in Auto mode. The fi rst week of operation is a learning week
during which the device stores habits and draws up a schedule for the
week. It then defi nes a program consisting of periods of Comfort and
Eco, independently for every day of the week. During this learning week,
the device will temporarily operate in permanent "Comfort" mode, there-
fore only manual Boost is possible.
Example of display in Comfort period
- 28 -
and for more than 5 seconds.
and for 10 seconds, then
3
and for 10 seconds.
3
Cod. 1910000002086 - nv00