Maintenance, Repairs And Warranty; Storage; Cleaning; Repairs - SoFlow Air Aluminum Bedienungsanleitung

5. Maintenance, Repairs and Warranty

5.1 Storage

Please store the electric scooter in a dry place. If left unused, recharge the battery every month to maintain longevity of the
battery and to avoid damage. The speed of self-discharge is higher in cold temperatures (e.g. in winter) compared to a warm
environment. Never store the device under direct sunlight (e.g. not in the trunk of a car). The temperature of the scooter
and its battery could rise above 50°C which could lead to irreparable damage. The battery also takes damage when cooler
than -20°C.

5.2 Cleaning

In order to avoid rust on the device, you should clean and dry the scooter after every use. Use a slightly moist sponge for the
cleaning and dry the device afterwards with a towel. The cleaning of screws and the ball bearings can especially increase the
longevity of the device. Do not use much water, since the electricity of the device can take damage through water. Also,
never use corrosive cleaning substances, such as alcohol or petroleum for cleaning. Never use a pressure cleaner for the Air
Aluminum or Air Carbon.

5.3 Repairs

The Air Aluminum and Air Carbon must only be repaired with original spare parts from a licensed supplier or shop and by a
licensed mechanic. The opening, disassembly or modification of a SoFlow scooter with non-licensed or non-original parts or
by a non-licensed person will lead to the warranty becoming invalid.
copyright by www.so-flow.com 20