Setting The Day And Time Announcement - AUDIOLINE 838G Bedienungsanleitung

1.3 SETTING THE DAY AND TIME
ANNOUNCEMENT
The day and the exact time are saved with each incom-
ing message so that you always know when callers left
their messages. To set the day and time announce-
ment, please proceed as follows:
1. Press and hold the
2. After the signal tone, press and hold the
button.
You will now hear all the days of the week, one after
the other. In addition, the weekdays will be shown in
the display as follows:
00 = Sunday, 01 = Monday, 02 = Tuesday,
03 = Wednesday, 04 = Thursday, 05 = Friday,
06 = Saturday
When you hear the correct day:
3. Release the TAG
the EINGABE button pressed.
24
Downloaded from www.Manualslib.com
EINGABE button.
button and continue to hold
manuals search engine
4. Press and hold the
now hear the hours, one after the other: "one, two ...
". The hours will also be shown on the display. When
you hear the correct hour announced:
5. Release the
EINGABE
the
6. Press the
see the minutes in the display and you will hear the
TAG
minutes announced, one after the other: one, two,
three ... ".
If the
MIN
change in steps of 10.
7. After you have heard the correct minute announced,
release the
The voice will now repeat the complete day and time
announcement once more.
The current day and time announcement can be interro-
gated at any time by pressing the
button (hour). You will
STD
button and continue to hold
STD
button pressed.
button several times. You will
MIN
button is kept pressed, the minutes
EINGABE
button.
EINGABE button.