Remote Access; Authorisation Code; Remote Access By Telephone; Remote Access Using Remote Access Transmitter - AUDIOLINE 838G Bedienungsanleitung

3. REMOTE ACCESS

3.1 AUTHORISATION CODE

Your AUDIOLINE 838G has personal access authorisa-
tion so that only you can listen to incoming messages
using the remote access facility. The authorisation code
is a three-digit number and can be found on a sticker on
the underside of the answering machine.

3.2 REMOTE ACCESS BY TELEPHONE

If you call from a telephone that has Touch-Tone Dial-
ling (TTD), you can easily control your answering ma-
chine remotely using the telephone keypad.
NOTE: A basic distinction is made between
two dialling processes when telephoning.
Touch-Tone Dialling is the fast modern proc-
ess, which is used in digital telephone net-
works.
These digital telephone networks are already extremely
widespread so that most telephones work using the
Touch-Tone Dialling process.
Downloaded from www.Manualslib.com manuals search engine
You can tell by listening which process is used. Simply
dial the number "9" on your telephone. If you hear sev-
eral pulses (chattering) the Pulse Dialling process is
used. If a single tone sounds, then Touch-Tone Dialling
is used.
3.3 REMOTE ACCESS USING REMOTE
ACCESS TRANSMITTER
If the telephone from which you want to remotely control
your answering machine works using Pulse Dialling,
you will need a remote access transmitter. As transmis-
sion is internationally standardised, you can use any
commercially available remote access transmitter.
If you should require such a remote access transmitter,
please refer to your dealer or contact AUDIOLINE di-
rectly.
To use the remote access transmitter, hold the loud-
speaker on the rear of the transmitter directly in contact
with the mouthpiece of the telephone receiver. If you
now press the appropriate numbers on the numerical
keypad of the remote access transmitter, these will be
transmitted to the AUDIOLINE 838G, which then inter-
prets them as commands.
31