Setting The Day And Time Announcement - AUDIOLINE AB830 Bedienungsanleitung

3.5

Setting the day and time announcement

The answering machine always saves the day of the week and the time of day with
each recorded message so that you always know when callers left their messages.
If you want to enter the day and time announcement for the first time or if you want
to change a day and time announcement that has already been set, please proceed
as follows:
1. Press and hold the
week currently set over the loudspeaker.
2. Press the
3. Press the
set over the loudspeaker.
4. Press the
5. Press the
currently set over the loudspeaker.
6. Press the
announced.
7. Confirm with the
will be repeated.
The day and time announcement can be checked at any time. Simply press the
button and you will hear the day of the week and the current time of day.
Note:
If there is a pause of more than 20 seconds while entering the day and time
announcement, the programming will be interrupted.
If no battery has been fitted or if the battery is discharged, the day and time
announcement must be re-entered if there should happen to be a power failure.
- Commissioning -
button for 2 seconds. You will hear the day of the
button repeatedly until you hear the correct day of the week.
button. You will hear an announcement of the hour currently
button repeatedly until you hear the correct hour announced.
button. You will hear an announcement of the minutes
button repeatedly until you hear the correct minutes
button and the complete day and time announcement
21