Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Using The Default Outgoing Message; Recording An Outgoing Message; Deleting Your Own Outgoing Message And Reverting To The Standard Message - AUDIOLINE AB 871 Bedienungsanleitung

Digitaler anrubeantworter
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4 Operation

Using the default outgoing message

If you have not recorded an outgoing message, the answering machine automatically plays the
default outgoing message.
Wording of the default outgoing message: Hallo, leider können wir Ihren Anruf nicht per-
sönlich entgegen nehmen. Bitte hinterlassen Sie Ihre Nachricht und Telefonnummer nach dem
Signalton."

Recording an outgoing message

1. Press and hold the S button. After a beep the display shows rA.
The outgoing message must be at least 3 seconds long and not longer than 60 se-
conds. The length of the outgoing message is deducted from the maximum recording
time. When your outgoing message is 18 seconds, for example, then 29 minutes and
42 seconds remain for incoming messages.
2. Speak your outgoing message into the microphone.
Keep a distance of about 15 cm from it.
3. To end recording, simply release the S button.
4. The outgoing message is automatically played back and the message PA appears in the
display. The volume can be adjusted by pressing the two arrow keys y and z.
You can play back your outgoing message at any time by pressing the S button briefly.

Deleting your own outgoing message and reverting to the standard message

1. Press the S button for 2 Seconds until a beep is heard.
Your outgoing message is deleted and the answering machine plays the default outgoing mes-
sage.

Setting the number of rings

On the rear side of the answering machine is a sliding switch (2 6 TS). Set the sliding switch to
the number of times the answering machine should ring before it takes a call.
Position
2
The call is taken after two rings.
6
The call is taken after six rings.
TS
The first call is taken after six rings and all the other calls after two rings. This
switch position can be used to implement the toll−saving remote access func-
tion. Details are provided in the Chapter Free of charge pre−remote access".
Service−Hotline Germany: Tel. 0180 5 001388, cost via German landline at time of going to print: 14 ct/min.,
different costs possible via mobile telephone systems
Significance
Operation
23

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis