Remote Access With Insufficient Memory Capacity; Important Information; Audioline Power Supply; Carrying Out A Reset - AUDIOLINE 838G Bedienungsanleitung

3.7 REMOTE ACCESS WITH INSUFFICIENT
MEMORY CAPACITY
You can control your answering machine at any time
using the remote access facility. If, however, there is no
memory left for new messages, the 838G will no longer
accept calls. In this case, please proceed as follows
1. Call your number. If there is not sufficient memory
capacity your call will not be answered after 2 or 6
rings.
2. Let it ring 9 times and your answering machine will
respond with three signal tones.
3. Now enter your authorisation code.
You will hear a signal tone in confirmation and you
now have the possibility of recreating more memory
space by deleting messages. For more information,
refer to Chapter 3.5.1.
Downloaded from www.Manualslib.com manuals search engine

4. IMPORTANT INFORMATION

4.1 AUDIOLINE POWER SUPPLY

The AUDIOLINE 838G may only be used with the origi-
nal power supply. Do not connect your answering ma-
chine to the sockets of other equipment as otherwise
you could ruin your answering machine and cause dam-
age to the telephone network.
Warning: Use only an AUDIOLINE power supply! The
use of other power supplies will invalidate any claims
under the guarantee. If faults should occur even though
you are using the AUDIOLINE power supply, please
consult your dealer.

4.2 CARRYING OUT A RESET

If, for any reason, your answering machine is no longer
working correctly, you should carry out a reset. To do
this, please proceed as follows:
1. Unplug the mains adapter and the telephone cable
from their respective sockets.
2. Remove the old battery.
3. Now plug the power supply into the socket.
35