Care; Fault Finding - AUDIOLINE 838G Bedienungsanleitung

4. Next please connect a new 9V battery and close the
battery compartment.
5. Plug the telephone cable back into the telephone
socket.
6. Now re-record your greeting message.

4.3 CARE

The case of your AUDIOLINE 838G can be cleaned
with a damp cloth. Do not use spray polish or cleaning
cream with abrasive particles, which could damage the
loudspeaker or the case. Do not expose the unit to di-
rect sunlight and avoid extreme humidity.

4.4 FAULT FINDING

If a fault should occur, please first check whether the
fault is in the unit or in the telephone line. Remove all
other telephone equipment and connect only the
AUDIOLINE 838G directly to the telephone socket. If
the fault is still there, connect just your telephone to the
telephone socket. The results will show you where the
fault lies.
36
Downloaded from www.Manualslib.com manuals search engine
Message display does not come on
Check whether the mains adapter is correctly seated in
the mains socket and whether the mains adapter cable
is properly seated in the rear of the AUDIOLINE 838G.
Check whether there is power at the socket.
Message display shows BL
The battery is discharged and must be replaced. If the
power fails, your greeting, all recorded messages and
the day and time announcement will be deleted.
Message display shows FL (FULL)
The memory capacity is exhausted.
Message display shows —
Either the greeting message or the day and time an-
nouncement has not yet been set up.