Dräger 6510 Gebrauchsanweisung Seite 38

Display mode
Selection of the result presentation:
a) numerical = corresponding to the
set measuring unit
b) Allocation of the result to in concen-
tration ranges with selected range lim-
its.
Available:
– PAF = Pass, Alert, Fail
– PF = Pass, Fail
– ZWPF = Zero, Warn, Pass, Fail
Measuring Unit
Selection of the measuring unit for the final result:
%, ‰, mg/L, µg/L, g/210 L, µg/100mL, µg/%, g/L, mg/100mL,
mg%, mg/mL
Result resolution
Selection of the measurement resolution.
38
Sample Mode
Auto sample
Display mode
Selection of the mode of time for sampling:
Back to menu
Result
PAF
a) definite volume
PF
ZPWF
Sampling is complete when minimum vol-
ume is reached.
or
b) end of breathing
Sampling is complete at the end of exhal-
ing.
Additional sample
Manual activation of sampling and lower
minimum volume
–
–
Also refer to page 33 and page 33.
BAC - Limits
Three range limits "Pass, Alert, Fail" for
the display modes PAF, PF and ZWPF.
Select and enter by pressing
and
The illustration on the following page shows the connection between
the limits and the display of the result.
Passive
Manual
,
M
--button.
OK
Sample Mode
Auto sample
Additional
Additional
Back to menu
Manual
Passive
BAC limits
Back to menu
Pass <= 0.10
Alert <= 0.24
Fail <= 0.48
Unit : mg/L