Geberit ESG 3 Betriebsanleitung Seite 38

To cancel the welding procedure, press the start button.
The <Welding procedure> LED display
the sleeve connection plugs. The <General malfunction>
LED display
three seconds. The <General malfunction> LED display
goes out.
1
Repeat the welding procedure with the cooled Geberit
electrofusion coupling or the cooled Geberit electrofusion
tape for anchor point.
4
Welding is completed after approx. 80 seconds (in the case
of electrofusion couplings with integrated thermal fuse,
approx. 7 minutes). The <Welding procedure> LED display
goes out and the <Welding complete> LED display
lights up (see figure D, rear cover page).
Result
Welding has been performed correctly.
B1158-002 © 07-2016
966.473.00.0 (02)
flashes. Press the start button and hold for
goes out. Remove
00:00:03
2
EN
3
39