Assembly; Checking Scope Of Delivery; Setting Up The Device - Zipper Maschinen ZI-RWM84 Betriebsanleitung

17

ASSEMBLY

17.1

Checking scope of delivery

Check the machine immediately after delivery for transport damage and missing parts..
17.2

Setting up the device

Place the machine on a solid surface. A concrete floor is the best foundation for the machine. The
space required by the machine and the required load capacity of the ground result from the
technical data (dimensions, weight) of your machine. Observe the local safety regulations when
designing the working area around the machine. When dimensioning the required space, take into
account that operation, maintenance and repair of the machine must be possible at all times
without restriction. The selected installation site must ensure a suitable connection to the electrical
mains.
17.3 Assembly
ZIPPER MASCHINEN GmbH
ZI-RWM84
1. Assembly thread-shaft
 Attach the threaded shaft (2) to the drive shaft
2. Assembly cone
 Slide a cone (4) and the clamping cover (5) onto
NOTCE:
the assembly of alternative adapters, e.g. for
motorcycle wheels.
www.Zipper-Maschinen.at
(1) using the screw (3).
the threaded shaft and loosely tighten the quick
release nut (6).
The threaded shaft is removable to allow
ASSEMBLY
35