Special Safety Instructions For Woodworking Machines; Hazard Warnings; Transport - Zipper Maschinen ZI-RWM84 Betriebsanleitung

 Water entry into machine increases the risk of electric shock. Do not expose machine to
rain or moisture.
 The machine may only be used in humid environments if the power source is protected
by a residual current circuit breaker.
 Do not use the power tool if it cannot be turned on and off with the ON/OFF switch.
15.6 Special Safety Instructions for that machine
 Do not operate the machine without the safety hood
 Never open the safety hood before the wheel has come to a complete stand still
 Keep hair, loose clothing, fingers and all other body parts away from moving machine
parts.

15.7 Hazard Warnings

Despite their intended use, certain residual risks remain. Due to the structure and construction
of the machine, hazardous situations may occur when handling the machines:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death..
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation
of the machine. Safe working depends first and foremost on you!
16

TRANSPORT

Irrespective of all safety regulations, their sound common sense and corresponding
technical suitability/training are and remain the most important safety factor in the
error-free operation of the machine. Safe working depends first and foremost on you!
For proper transport, follow the instructions and information on the transport packaging
regarding the centre of gravity, attachment points, weight, means of transport to be used and
prescribed transport position, etc.
Transport the machine in its packaging to the installation site using a forklift or pallet truck
with the appropriate load capacity.
ZIPPER MASCHINEN GmbH
ZI-RWM84
www.Zipper-Maschinen.at
D A N G E R
W A R N I N G
C A U T I O N
N O T I C E
W A R N I N G
TRANSPORT
34