Minimum Clearances - Heatscope MHS-ZE600 Original Montage- Und Gebrauchsanleitung

EN

7. Minimum clearances

The dimensions given are minimum values and may differ from the local building and fire regula-
tions. These must be observed and complied with in any case.
The illustrated installation surfaces must comply at least with fire protection class A2.
Please note: The HEATSCOPE® ZERO fulfills IP protection class 4 (IP­X4) for ceiling mounting and IP
protection class 0 (IP­X0) for wall mounting.
Vorgeschriebene Abstände zu brennbaren Montageflächen:
A min. 12 inch/30cm to wall
min. 3 inch/6 cm to another HEATSCOPE® ZERO
B min. 12 inch/30cm
C min. 32 inch/80 cm to furniture below the HEATSCOPE® ZERO
D min. 3 inch/210 cm
E min. 3 inch/6 cm to combustible surfaces
(MHS­DAHS4 madatory)
F min. 8 inch/20 cm
G min. 6 inch/12 cm
(MHS­WH45, MHS­WHSL or MHS­DAHGMS madatory)
A
A
D
Downloaded from www.Manualslib.com
B
A
B
E
C
manuals search engine
F
G
D
Protect from
wind and drafts.
Do not
use force.
Protect from
moisture and
humidity.