Herunterladen Inhalt Inhalt Diese Seite drucken

Heatmiser SmartStat Anleitung Seite 23

Raumthermostat
Inhaltsverzeichnis

Werbung

Temperature Hold
Ein/Aus
The temperature hold function allows you to manually override the current operating
Wird das Flammen-Symbol angezeigt, ist die Heizung auf EIN gestellt.
program and set a different temperature for a desired period.
Wird das Flammen-Symbol nicht angezeigt, ist der SmartStat zwar in Betrieb aber ein
Aufheizen zum Erreichen der eingestellten Temperatur ist nicht notwendig.
Use the Left / Right keys to scroll to Hold and press Tick ........................
Zum vollständigen Ausschalten des SmartStat, scrollen Sie auf das Netz-Symbol
Use the Up / Down keys to set the desired Hold time .......................................
und halten Sie das Häkchen für ungefähr 4 Sekunden gedrückt bis die
Use the Left / Right keys to scroll between hours and minutes .....................
Anzeige leer ist .........................................................................................................................
Press Tick to confirm selection ..........................................................................................
Die Anzeige und das Heizsystem sind dann AUS.
Use the Up / Down keys to set the desired Hold temperature ......................
Um den SmartStat erneut auf EIN zu schalten, drücken Sie das Häkchen einmal ..........
Press Tick to confirm selection ..........................................................................................
SmartStat vollständig AUS
You will see the HOLD LEFT indication is displayed on screen.
The time will countdown the set duration and then revert to the normal program.
To cancel a temperature Hold, repeat these steps but reduce the Hold time to 00:00 hrs
SmartStat EIN
HOLD LEFT Indicator
and hold time remaining
22

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis