GB
INSTRUCTION MANUAL
To prevent water leakage from the soleplate, do
not keep the powerful steam button pressed for
more than 5 seconds.
2.7. V ERTICAL STEAM
•
Ensure that there is enough water in the water tank.
•
Stand the steam iron on its heel rest on an iron-safe
surface and plug it.
•
Set the temperature control dial and variable steam
control to their maximum positions.
•
Hold the iron vertically and press the steam burst button,
an intense steam will be ejected from the soleplate.
2.8. A NTI-DRIP FUNCTION
•
In this case the anti-drip function automatically
activates to prevent vaporization, so that you may iron
the most delicate fabrics without the risk of spoiling or
staining them.
2.9. A NTI-CALC FUN
•
Your steam iron has anti-calc function that protects
your appliance from scale.
2.10.WHEN YOU FINISHED IRONING
•
Set the temperature dial to the minimum position.
•
Remove the mains plug from the wall socket.
•
Stand the iron on heel rest.
2.11.AUTOMATIC SHUT OFF
•
If the steam iron is switched on and has not been
moved for a while, it will turn off in 8 minutes if left in
vertical position or in 30 seconds if left in horizontal
position. A blinking red light will indicate that auto shut
off is activated.
•
To swith the steam iron on after automatic shut off, just
move it.
. CARE AND CLEANING
•
Before cleaning the steam iron ensure it is unplugged
from the power supply and has completely cooled
down.
•
Do not use abrasive cleaners.
3.1. S ELF-CLEANING
•
Fill water reservoir up to the maximum level and then
close it.
•
Set the temperature control to its maximum position.
•
Insert the main plug into the wall socket.
•
Allow the iron to heat up until the indicator light goes
out.
•
Holding the iron horizontally over the sink then change
the steam control to the maximum position and press
the self-cleaning button.
•
Boiling water and steam will be ejected from the holes
in soleplate with Impurities washed out. Rock the iron
forwards and backwards during this operation.
•
Repeat self-cleaning if you notice that much impurity
has been washed out.
•
Move the iron over an old (preferably) piece of cloth.
This to ensure that the soleplate will be dry during
storage.
. STORAGE
•
Unplug the appliance from the power supply, empty
the water tank (do it after each use) and allow steam
iron cool down completely.
•
Wrap the cord around the heel rest.
•
To protect the soleplate, place the steam iron in an
upright position on its heel rest.