Maintenance; Fault Finding - Bosch AMR 32 F Bedienungsanleitung

EURO • Printed in England • BA F016 L69 854 • AMR 32 F • GB • OSW 10/01
AMR 32 F - Buch Seite 4 Freitag, 12. Oktober 2001 10:47 10

Maintenance

Note: To ensure long and reliable service, carry out
the following maintenance regularly.
Regularly check for obvious defects such as loose,
dislodged or damaged tines, loose fixings, and worn
or damaged components.
Check that covers and guards are undamaged and
correctly fitted. Carry out necessary maintenance or
repairs before using.
If the raker should happen to fail despite the care
taken in manufacture and testing, repair should be
carried out by an authorised customer service agent
for Bosch garden products.
For all correspondence and spare parts orders, al-
ways include the 10-digit part number from the
nameplate of the machine!

Fault Finding

The following table gives checks and actions that you can perform if your machine does not operate correctly.
If these do not identify/remedy the problem, contact your service agent.
Warning: Switch off and remove plug from mains before investigating fault.
Symptom
Machine fails to operate
Machine functions
intermittently
Machine labours or belt
squeals
Cutting tines not rotating
Excessive
vibration/noise
Poor collection
15 • F016 L69 854 • TMS • 08.10.01
Downloaded from www.Manualslib.com
Stop, remove plug from the power supply
and remove the grassbox.
Possible Cause
Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Extension cable damaged
Machines internal wiring damaged
worn/missing tines
Raking/Scarifing too low
Cutting tines obstructed by gras
Belt is slipping or is damaged
Cutting tines damaged
Raking/scarifing in wet conditions
manuals search engine
Removing/Fitting Raker tine
G
Stop, remove plug from the power supply
and remove the grassbox.
– turn the machine upside down
– remove the tine cover by removing screws 12
– remove the broken/damage tine 13 and fit re-
placement tine
– re-fit the tine cover and screws 12
After Raking or
H
Scarifying Storage
Clean the exterior of the machine thoroughly using a
soft brush and cloth. Do not use water, solvents or
polishes. Remove all grass and debris, especially
from the ventilation slots 8.
Turn the machine on its side and clean the tine area.
If grass cuttings are compacted in the tine area, re-
move with a wooden or plastic implement.
Store the lawnraker in a dry place. Do not place
other objects on top of the machine. To save space,
fold up the handle fully.
Ensure cables
folding/unfolding top handles, do not drop
the handles.
Remedy
Turn power on
Use another socket
Inspect cable, replace if damaged
Replace fuse
Inspect cable, replace if damaged
Contact Service Agent
fit replacment
Increase height of raking
see "Adjusting the operating height"
Clear obstruction
Contact Service Agent
Contact Service Agent
see "Adjusting the operating height"
English - 4
are not trapped when