Setting The Alarm; Switching Off The Alarm - Renkforce RF-IR-MONOV2 Bedienungsanleitung

Setting the alarm

The device has two separate alarm times, which can be set and used separately. Each of the alarm times is configured
in the same way.
• Now select the desired alarm in the alarm menu and switch it on.
• Now set the alarm time, alarm tone, alarm days, alarm tone volume, and alarm duration.
When you select the Internet radio as an alarm source, you must select a station from your saved favourites.
• The alarm is now active and set up. You can now exit the menu.
• When the alarm function is enabled, a corresponding icon appears on the display.

Switching off the alarm

• When the alarm sounds, you can switch it off by pressing the button (3).
• The alarm is thus switched off until the next alarm time.
• To disable the alarm completely, navigate to the alarm menu and switch off the enabled alarm.
• The current alarm settings will still be retained.
Alarm repetition
• When the alarm sounds, you can enable the alarm repetition by pressing the rotary knob (7).
• This will mute the alarm for 9 minutes.
• To disable the alarm repetition, press the button (3).
am
Snooze
9:00
Press POWER to stop
59