F) Bluetooth Playback; Alarm Function - Renkforce RF-IR-MONOV2 Bedienungsanleitung

f) Bluetooth playback
®
Your Bluetooth device and the Internet radio must be paired with each other to enable transmission between both
®
devices. This process is called "Pairing".
If a Bluetooth
both devices are within range and Bluetooth
carried out only once. However, this function may have to be activated on your Bluetooth
• Press the button (5 or 20) and select the "BLUETOOTH" menu item with the rotary knob (7) or the
arrow buttons (16).
The "BLUETOOTH" menu item can also be accessed directly by pressing the MODE button (19).
• Press the rotary knob (7) or the OK button (26) to confirm the selection.
• Switch on your Bluetooth
instructions for the corresponding device). Your device will search for available Bluetooth
• When the Internet radio has been found, your Bluetooth
• Select the Internet radio on your Bluetooth
• Start playback on your Bluetooth
• The playback will now take place via the Internet radio.
g) Alarm function
The alarm function works only when the power adapter is connected and the device has been switched to
standby mode. When the device is switched off (dark display), the alarm function is not active.
Configuring the alarm settings
• Press the button (5 or 20), select the "ALARM" menu item with the rotary knob (7) or the arrow buttons (16) and
confirm your selection.
The "ALARM" menu item can also be accessed directly by pressing the
58
device is already paired with the Internet radio, pairing is automatically restored as soon as
®
device with which the Internet radio is to be paired and enable the pairing mode (see
®
device.
®
device.
®
mode is enabled on the Internet radio, i.e. "pairing" must be
®
device displays its name (RF-IR-MONOV2).
®
device.
®
devices.
®
button (17).