Auerswald COMfortel D-600 Betriebsanleitung Seite 11

The system displays a message that it is searching for provisioning files.
The telephone's IP address is shown at the top of the display, on the right,
at the same time.
3. Write down the IP address.
Note: Then make these settings:
• Use the ▲▼ arrows or touch the screen to navigate in the list.
• Enter numbers and characters, either using the keypad or the screen
keyboard.
• Press OK
Configuring the language and location
Press Country.
1.
2. Select Phone language.
3. Configure the language for the telephone (here: English).
The menu language changes.
4. Select Location.
5. Set the telephone's location.
Select Language web interface.
6.
7. Configure the language for the web interface.
8. Press Back
You return to the initial configuration.
9. To make more configuration settings, do one of the following:
• Press WebUI to enable Access > Web administration (https). You can
now conveniently configure additional settings in the web interface. See
Opening the web interface.
• Press Cancel to configure additional settings on the telephone. See
Configuring an identity on the telephone.
Initial configuration is closed.
Configuring an identity on the telephone
1. Select
You access a list of unconfigured identities.
2. Open an unconfigured identity.
3. Then enter the data that is then listed, which differs depending on the
operating mode.
Note: To enter numbers, either press and hold down the number keys
or use the screen keyboard.
SIP
Username
SIP
Registrar
Password
to confirm your selection or entry.
.
> Settings > Identity.
PBX
The internal number
configured for the telephone
Example: 100
The PBX's IP address
Example: 192.168.123.123
The associated password
VoIP provider
The username configured for
the account
Example: telephonenumber@Provider.co.uk
The VoIP provider's URL
Example: Providername.co.uk
The associated password