Record Schedule - Dedicated Micros d4 Installations Anleitung

Record Schedule

The record rate and image size determine the amount of time cameras can be
recorded for and the update rate of each camera. Settings can be applied to day,
night, and weekend schedules.
Day
Night
Weekend
Recorded file size
Max recording time
Total video storage
Earliest recording
Note: The Night and Weekend options are only displayed if a corresponding
Night and Weekend schedule has been configured in the Schedule menu page.
Downloaded from www.Manualslib.com
Standard PPS Event PPS Events active
3 3 Both
Alarms
Activity
None
3 3 Both
Alarms
Activity
None
3 3 Both
Alarms
Activity
None
18 KB
--:--
141GB
01/10/2001 12.00
manuals search engine
Standard and Event PPS
Select a record rate in pictures per second (PPS) to be recorded across all cameras.
When a single camera is being recorded. The maximum record rate is 25PPS for
PAL and 30PPS for NTSC cameras when a single camera is recorded. When
multiple cameras are recorded the maximum record rate is 18PPS.
The default record rate is 3PPS, this is the equivalent to a VCR in 48-hour time-
lapse mode. However, because there are only a maximum of 4 cameras the
update rate is faster than a 24-hour time-lapse mode recording 9 or 14 cameras.
To configure D4 to record only events, select the Standard PPS as 0PPS and the
Event PPS to a value you want the events to record at for example, 3PPS. The D4
will then not record any cameras until activity or alarms are triggered, it will then
record the alarmed/activity camera interleaved with the other cameras.
Note: Audio is not recorded when the record rate is at 0PPS.
The table below shows the equivalent record rates of typical VCR time-lapse modes:
VCR Time-lapse mode (hours)
3 (2)
12
24
48
72
168
Figures in brackets are for NTSC systems.
D4 Record rate (PPS)
25 (30)
12
6
3
2
1
13