Playing Files On Usb Flash Drives, Sd Cards, Data Discs And Network Drives; Adding Files To And Removing Them From A Playlist - Tascam BD-MP4K Bedienungsanleitung

Playing files on USB flash drives, SD
cards, data discs and network drives
1.
Use the j and k cursor buttons to select an SD card,
USB flash drive, data disc or network drive icon and
press the ENTER button to show individual folders as
below. (The process for opening folders on SD cards,
USB flash drives, data discs and network drives is the
same.)
... : Top folder
Photo: Photo folder
Music: Music folder
Video: Video folder
AVCHD: High-quality video folder
2. Use the j and k cursor buttons to select a folder and
press the ENTER button to show the files inside the
folder.
(Example: Music folder open)
Files and folders are shown in the order of entry (order
written).
3. Use the j and k cursor buttons to select a file and
press the 7 button to start playback.
When a file is selected, the following information
appears on the right side of the screen.
i Thumbnails of image files
i Various information for audio and video files
When a file is selected, press the ; cursor button to add
a check mark before the file name, selecting it.
16
TASCAM BD-MP4K
i In this state, press the ENTER button to play selected
files in order. After playback completes, the screen
above will reopen.
i To remove a check mark from a file, select it again and
press the ; cursor button.
p Playlist icon
By using a playlist with files selected from a medium (item),
they can be played back in order.
Adding files to and removing them from
a playlist
Adding files to a playlist
1. Use the j and k cursor buttons to select an SD card,
USB flash drive or data disc drive icon, and press the
ENTER button to select the desired folder.
NOTE
Files on a network cannot be added to the playlist.
2. Select the file to add to the playlist, and press the TITLE/
POP UP button to open a pop-up message.