Tascam BD-MP4K Bedienungsanleitung Seite 20

Security
Function
Change Password
Parental Control
Country Code
Network
Function
Internet Connection
Interface
IPv6 On
IP Protocol Priority
IPv4 Information
IPv6 Information
Connection Test
IPv4 Setting
IPv6 Setting
20
TASCAM BD-MP4K
Options
More...
More...
More...
Options
Enable/Disable
Ethernet/Wireless
Enable/Disable
IPv4/IPv6
More...
More...
More...
Auto/Manual
Auto/Manual
Explanation
A password can be set for the unit.
p The password is a 4-digit number.
* The default password is "0000".
Set the age to use for Parental Control.
A password must be input to change this.
* The default setting is "Off".
Set the country to use for Parental Control.
A password must be input to change this.
Explanation
Enable or disable Internet connection for the unit.
Set the method of Internet access for the unit to "Ethernet" or
"Wireless".1
When "Yes" is selected for "Wireless", the following connection
methods can be selected.
p Scan: The unit will search for access points, allowing selection of
a network.
p Manual: An SSID can be set manually to connect.
p Auto: Connection is possible using the Wi-Fi Protected Setup
(WPS) standard.
This sets whether or not IPv6 can be used with this unit.
The following connection methods can be selected.
p Enable: Use IPv6. When enabled, "IP Protocol Priority", "IPv6
Information" and "IPv6 Setting" can be set and
checked.
p Disable: Do not use IPv6.
Select the IP version to use first.
p IPv4: Use IPv4 first.
p IPv6: Use IPv6 first.
The following information related to the Internet connection using
IPv4 is shown.
p Interface, address type, IP address, subnet mask, gateway, DNS1
and DNS 2
The following information related to the Internet connection using
IPv6 is shown.
p Interface, Link-Local Address, IP address, Prefix, gateway, DNS1
and DNS 2
This tests the network connection.
Select how the unit's IP address is set.
p Auto
Automatically acquire the IP address from a DHCP server.
p Manual
Manually input the interface, address type, IP address, subnet
mask, gateway, DNS1 and DNS2 numbers.
Select how the unit's IP address is set.
p Auto
Automatically acquire the IP address from a DHCP server.
p Manual
Manually input numbers for Interface, Link-Local Address, IP
address, Prefix, gateway, DNS1 and DNS 2