System Information - Tascam BD-MP4K Bedienungsanleitung

Test Tone
Trim adjustment overview
1
*
Digital full scale (−10 dB) is shown as "0" to make adjustment of surround channel speaker volume differences easier.
If trim adjustment is unnecessary, leave it at its default setting (+10 dB).
Lt/Rt is a two-channel downmix output that supports Dolby surround. When played on an ordinary stereo system, the L and R channel
2
*
balance could be degraded. If this occurs, select Stereo.
Post-processing settings
Function
EQ
Downmix
S/PDIF Output Configuration
Function
Configuration
* The maximum audio level will become −10 dBF only for L/R

System Information

Use to check the MAC address and revision of this unit.
o Model: BD-MP4K
o MAC address: xx-xx-xx-xx-xx-xx
o Revision: xxx.xxx
More...
Options
Off/Rock/Pop/Live/Dance/Classical/Soft
Off/DH/DVS/MVS
Options
p FL/FR
p SL/SR
p C/SW
p SBL/SBR
p L/R (−10 dBF)*
This outputs white noise from the speakers in counterclockwise
order starting from the L speaker. Press the ENTER button while a
speaker is highlighted to enable changing its speaker size, trim and
delay settings.
1
NOTE
The options and setting ranges are the same as in the channel
configuration, but the subwoofer cannot be adjusted.
Explanation
The applies equalization to the audio.
This downmixes surround audio.
p DH: Dolby headphones
p DVS: Dolby virtual speakers
o Reference/Wide
p MVS: Virtual speakers
o Movie/Music
NOTE
MVS can only be used when the speaker setting channel
configuration is 2.x.
Explanation
The selection items are the same signals that are output from the
analog outputs on the back of the unit.
The selected analog output* is output from the COAXIAL digital
audio output connector.
25
TASCAM BD-MP4K