Precautions For Placement And Use; Using The Teac Global Site; Product Registration; Beware Of Condensation - Tascam BD-MP4K Bedienungsanleitung

Precautions for placement and use

p The operating temperature range of this unit is 5–35 °C.
p Do not install this unit in the following types of locations.
Doing so could make the sound quality worse or cause
malfunction.
Locations with frequent vibrations
Near windows or other places exposed to direct sunlight
Near heaters or other extremely hot places
Extremely cold places
Very humid or poorly ventilated places
Very dusty places
p Install the unit so that it is level.
p To enable good heat dissipation, do not place anything on
top of the unit.
p Do not place the unit on top of a power amplifier or other
device that generates heat.

Using the TEAC Global Site

You can download updates for this unit from the TEAC Global
Site:
https://teac-global.com/
In the TASCAM Downloads section, select the desired language
to open the Downloads website page for that language.

Product registration

Customers in the USA, please visit the following TASCAM
website to register your TASCAM product online.
https://tascam.com/us/

Beware of condensation

Condensation could occur if the unit is moved from a cold place
to a warm place, it is used immediately after a cold room has
been heated or it is otherwise exposed to a sudden temperature
change. To prevent this, or if this occurs, let the unit sit for one or
two hours at the new room temperature before using it.

Cleaning the unit

Use a dry soft cloth to wipe the unit clean. Do not wipe
with chemical cleaning cloths, thinner, alcohol or other
chemical agents. Doing so could damage the surface or cause
discoloration.

Notes about power supplies

p Insert the included power cord all the way into the AC IN
connector.
p Do not connect a power supply other than one that is 100V
AC (50/60Hz).
p Hold the power cord by its plug when connecting or
disconnecting it.
About TASCAM customer support
service
TASCAM products are supported and warrantied only in their
country/region of purchase.
To receive support after purchase, on the TASCAM Distributors
list page of the TEAC Global Site (https:// teac-global.
com/), search for the local company or representative for the
region where you purchased the product and contact that
organization.
When making inquiries, the address (URL) of the shop or
web shop where it was purchased and the purchase date are
required.
Moreover, the warranty card and proof of purchase might also
be necessary.

SD cards and USB flash drives

This unit can use SD cards and USB flash drives for playback.
A list of SD cards and USB flash drives that have been confirmed
for use with this unit can be found on the TEAC Global Site
(https://teac-global.com). Check the page for this product. You
can also contact TASCAM customer support service.

Precautions for use

SD cards and USB flash drives are delicate media.
In order to avoid damaging SD cards and USB flash drives,
please take the following precautions when handling them.
p Do not leave them in extremely hot or cold places.
p Do not leave them in extremely humid places.
p Do not let them get wet.
p Do not put things on top of them or twist them.
p Do not hit them.
p Do not remove or insert them during playback, data
transmission or other access.
p When transporting them, put them into cases, for example.
9
TASCAM BD-MP4K