Playing Files On Sd Cards And Usb Flash Drives; Adding Files To And Removing Them From A Playlist - Tascam BD-MP1 Bedienungsanleitung

Playing files on SD cards and USB flash
drives
1.
Use the j / k cursor buttons to select an SD card or
USB flash drive and press the ENTER button to show
individual folders as below. (The same method is used
to show the content of folders on both SD cards and
USB flash drives.)
...: Top folder
Photo:
Photo folder
Music: Audio folder
Video: Video folder
AVCHD:
High-quality video folder
2.
Use the j / k cursor buttons to select a folder and
press the ENTER button to show the files inside the
folder.
(Example: Music folder open)
3.
Use the j / k cursor buttons to select a file and press
the 7 button to start playback.
When a file is selected, the following information
appears on the right side of the monitor.
i Thumbnails of image files
i Various information for audio and video files
When a file is selected, press the ; cursor button to add
a check mark before the file name, selecting it.
16
TASCAM BD-MP1
i In this state, press the ENTER button to play the
selected files in order. After playback completes, the
screen above will reopen.
i To remove a check mark from a file, select it again and
press the ; cursor button.
p Playlist icon
By using a playlist, files can be played back in the order
selected from the media (items).
...: Top folder
Photo:
Photo folder
Music:
Audio folder
Video: Video folder
Adding files to and removing them from
a playlist
Adding files to a playlist
1.
Use the j / k cursor buttons to select an SD card or
USB flash drive and press the ENTER button to select
the desired folder.
2. Select the file to add to the playlist, and press the TITLE/
POP UP button to open a pop-up message.