Speaker Settings; Channel Configuration - Tascam BD-MP4K Bedienungsanleitung

Speaker settings

Channel configuration

From the Home Screen, use Settings > Audio Settings > Speaker Set-
tings to set the speaker channel configuration.
1. From the submenu Configuration, select the number of
speakers.
Use the ; cursor or ENTER button to move to the function
setting. Use the k and j cursor buttons to select the
number of speakers to use, and press the ENTER button to
confirm.
2. Select the channel mode on the channel mode selection
screen.
Options
Number of speak- Channel modes
ers
2.x
3.x
4.x
5.x
6.x
7.x
Use the k and j cursor buttons to select the channel
mode, and press the ENTER button to confirm.
NOTE
This screen will not be shown for some speaker number
selections.
40
TASCAM BD-MP4K
Lt/Rt, Stereo
LCR
LRLsRs
None
None
C+LR+LssRss+LsrRsr
3. Select the subwoofer on the Subwoofer Selection Screen.
Use the k and j cursor buttons to select the subwoofer,
and press the ENTER button to confirm.
4.
Use the Speaker Settings Screen to make settings for each
speaker.
Example with 7.x and C+LR+LssRss+LsrRsr settings
Use the k and j cursor buttons to select the speaker to
set, and press the ENTER button to confirm.
5. Items that can be set for the selected speaker will be shown.
Use the k and j cursor buttons to select the item to set,
and press the ENTER button to confirm.
Press the RETURN button to return to speaker selection.
NOTE
The only subwoofer setting that can be changed is trim.