Herunterladen Inhalt Inhalt Diese Seite drucken

Jumping To A Specific Playback Time, Scene Or Track; Playing Usb Flash Drives And Sd Cards - Tascam BD-MP1 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für BD-MP1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Jumping to a specific playback time, scene
or track
(This also applies to "chapters" when using audio discs.)
During disc playback, press the SEARCH button to show an
information bar at the top of the monitor. A cursor will appear in
the time display area.
At this time, press a l / ; cursor button to move the selection
between the time and chapter display areas.
NOTE
Only playback times and chapter numbers that exist on
the playing disc can be specified. Values that exceed these
ranges cannot be specified.
Jumping to a specific playback time
1.
In this state, press the ENTER button to select the time
display area, enabling the value to be changed.
2.
Use the number buttons to input values.
Use the l / ; cursor buttons to move between the hours,
minutes and seconds.
(In the illustration below, values have been entered for
minutes and seconds.)
3.
After inputting values, press the ENTER button to start
playback from the specified time.
(The chapter display will also change to the chapter at the
specified time.)
Chapter display
Press the ON SCREEN button to close the information bar.
Jumping to a specific chapter or track
1.
Use a l / ; cursor button in the time display area to move
the cursor to the chapter display area.
In this state, press the ENTER button to show up and down
triangle icons in the chapter display area, enabling the
value to be changed.
30
TASCAM BD-MP1
Time display
Hours: minutes: seconds
2.
Use the number buttons to input values.
3.
After inputting values, press the ENTER button to start
playback from the specified chapter.
(The time display will also change to the time at the
specified chapter.)
Press the ON SCREEN button to close the information bar.

Playing USB flash drives and SD cards

To play these media, connect them to the USB port* or SD card
slot on the front of the unit.
* Another USB port is on the back of the unit.
While the medium is being read, "
display, followed by one of the items below when reading
completes.
o USB flash drive:
USB
o SD card:
SD
1.
Select Media on the HOME screen and press the ENTER
button.
Media icons will appear. Use the j / k cursor buttons to
select an SD/USB icon and press the ENTER button.
2.
Opening the selected icon will show the following folders.
Top folder
...:
Photo:
Photo folder
Music:
Audio folder
Video:
Video folder
AVCHD:
High-quality video folder
3.
Select the target folder, and press the ENTER button.
Files inside the folder will be shown.
(Example: Music folder open)
" appears on the
LOAD

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis