Special Functions; Language Settings - AEG CTV 3202 LCD Bedienungsanleitung, Garantie

English
36
Hold Function
Press the HOLD button to pause and continue the automatic access of subpages.
Display Size
• Press the SIZE button to change the Teletext font size and to toggle in large font mode between top and bottom half
of the page.
Hidden Information
Teletext pages with games or riddles often contain the hidden answers.
• Press the REVEAL button to display the answer. Not all broadcasters support this function.
Access Index Page
• Press the INDEX button to display the index page (generally page 100).
Set Favourite Pages
You can set favourite Teletext pages through the four colour buttons.
1. In Teletext mode press ENTER.
2. Now press the colour button under which to save the Teletext page. The number in the respective colour box starts
flashing.
3. Enter the desired Teletext page.
4. In Teletext mode, press ENTER to display your preset Teletext pages in the colour boxes; recall the pages by press-
ing the respective colour button.
5. Press ENTER to deactivate the function.

12. Special Functions

12.1 Language Settings

12.2 Insertion
1. Press the MENU button to show the OSD main menu.
2. Press the button until OPTIONS is activated.
3. Mark the item with the button:
OSD Duration: with the arrow buttons, select the time after which the OSD menu fades out. You have the choice
-
between Out (the OSD menu remains superimposed until you press the EXIT button.), 15, 30, 45, and 60 seconds.
- Blue Screen: Press the button to turn the function on or off. If no signal is received when the function is active,
then the screen will show a blue picture and the insertion of No signal.
4. Press the EXIT button to leave the menu. The settings will be saved.
12.3 Default
With reset to default settings all user-defined settings are deleted. Your personal password is not deleted.
1. Press the MENU button to display the OSD main menu.
2. Press the arrow button until OPTIONS is activated.
1. Press the MENU button to display the OSD main menu.
2. Press the arrow button until OPTIONS is activated.
3. Press the arrow button to highlight the item:
- OSD Language: select the language for the OSD menu with
the arrow buttons.
4. Press EXIT to exit the menu and save the changes.