Further Sound Settings; Current Time And Timer; Current Time; On Time And Off Time - AEG CTV 3202 LCD Bedienungsanleitung, Garantie

English
34
5. Press the MENU button to be able to make more changes. Press to access the desired item and set the value with
the arrow buttons / .
6. Press EXIT to exit the menu and save the changes.

9.6 Further Sound Settings

• Use Balance to set the sound balance between left and right speaker.
• Select Auto Volume to adjust different volume, e.g. when changing the channel.
• Surround Sound means that the sound is played back in a type of spatial sound.
1. Press the MENU button to display the OSD main menu.
2. Press the arrow button until the menu SOUND is activated.
3. Mark the item that you want to set with the button.
4. Balance: Press ENTER to display the menu. Press / to set the desired value.
Auto Volume / Surround Sound: Press to activate/deactivate the function.
5. Press EXIT to exit the menu and save the changes.

10. Current Time and Timer

10.1 Current Time

10.2 On Time and Off Time

On Time and Off Time define the time when the TV set turns on and off. You can define different periods.
NOTE:
• These functions turn your TV set on from standby mode or into standby mode. If your TV set is turned off with the
main switch this functions is invalid.
• The time needs to be set so that this function can be used. The time is lost as soon as the television is turned off
with the power plug, or as soon as the power plug has been pulled from the outlet.
1. Press the MENU button to display the OSD main menu.
2. Press the arrow button until the menu TIME is activated.
3. Press the arrow button to highlight Off Time or On Time.
4. Press ENTER to access the function.
5. Press the arrow buttons to highlight and change the displayed functions.
Off Time:
- Off Time: Define if the setting is to be performed once or regularly. Select between:
(Off, Once, Daily, Mon-Fri, Mon-Sat, Sat-Sun or Sun)
- Hour / Minute: Set the off time.
On Time:
- On Time: Define if the setting is to be performed once or regularly. Select between:
(Off, Once, Daily, Mon-Fri, Mon-Sat, Sat-Sun or Sun)
- Hour / Minute: Set the on time.
- Source: Select the source with which the device is supposed to turn on.
NOTE:
If MEDIA is selected as the source, then an auto start of a data file will not take place.
1. Press the MENU button to display the OSD main menu.
2. Press the arrow button until the menu TIME is activated.
3. Press the arrow button to highlight Clock.
4. Press ENTER to access the function.
5. Enter the values such as date with the arrow buttons / .
6. Press EXIT to exit the menu and save the settings.