Select Source; Connect External Devices - AEG CTV 3202 LCD Bedienungsanleitung, Garantie

English
28

4.7 Select Source

1. In on mode press the SOURCE button. The source menu (connected devices) is dis-
2. Press the arrow buttons / on the remote control or CH +/- on the device to select the
3. Press ENTER or VOL +/- on the device to confirm.

5. Connect External Devices

Your TV set features a variety of connectors for different devices (e.g. DVD recorder, PC, camera and set top box).
IMPORTANT! Ensure that your TV set and all devices to be connected are turned off before connection. Observe the
user manuals of devices to be connected.
SCART Connector
The SCART connector at the rear transmits analogue image and sound signals in good quality. Connect here devices
such as VCR, satellite receiver, game console or Pay-TV decoder.
• Connect the device via full-featured SCART cable to the SCART connector.
• In the source menu (press SOURCE button) select SCART.
VIDEO Connectors
Via the cinch sockets LIN and RIN and the socket VIDEO on the backside, you can connect for example a video camera.
• Connect the device with a cinch cable (RCA) to the sockets VIDEO, LIN, and RIN.
IMPORTANT! Observe the colour coding of the cables when using AV cable (video = yellow, audio L = white and
audio R = red).
• Select the AV input in the menu Input Source (press SOURCE button).
PC Connector
• Use a VGA cable to connect the monitor connector of the PC with the VGA connector on the TV set.
• Use an audio cable to connect the audio connector of the PC with PC AUDIO IN on the TV set.
• In the source menu (press SOURCE button) select PC.
Component Connector
The component connector Y Pb Pr transmits analogue image signals of external devices, e.g. AV receiver or DVD record-
er in very good quality.
• Use a component cable (purchase separately at your dealer) with 3 RCA connectors to connect component output of
the external device with the inputs Y Pb Pr on the TV set.
• Use an audio cable to connect the audio output of the external device with the audio connectors LIN and RIN on the
TV set.
• In the source menu (press SOURCE button) select YPbPr.
HDMI Inputs
Digital video and audio signals are transmitted in high quality from external devices via the HDMI ports.
• Use an HDMI cable (not supplied) to connect the HDMI output of the external device with one of the HDMI inputs on
the TV set.
• Select signal input HDMI1, HDMI2 or HDMI3 in the source menu (press SOURCE button).
played.
desired source.
NOTE:
Press the EXIT button to exit the menu without changes.