Getting Started; Charging Modes - NOCO Genius G26000 Betriebsanleitung

Contacting NOCO.
Mailing Address:
About G26000.
some of the most innovative and advanced technology on
the market, making each charge simple and easy. It is quite
possibly the safest and most efficient charger you will ever
use. The G26000 is designed for charging all types of 12V
& 24V lead-acid and 12V lithium-ion batteries, including
Wet (Flooded), Gel, MF (Maintenance-Free), CA (Calcium),
EFB (Enhanced Flooded Battery), AGM (Absorption Glass
Mat), and LIB (Lithium Ion) batteries. It is suitable for
charging battery capacities from 25 to 500 Amp-Hours and
maintaining all battery sizes.

Getting Started.

read the battery manufacturer's specific precautions and
recommended rates of charge for the battery. Make sure
to determine the voltage and chemistry of the battery by
referring to your battery owner's manual prior to charging.
Mounting.
mounting. Mount the charger in a desired location with
#10 self-drill screws. Make sure there are no obstructions
behind the mounting surface. It is important to keep in mind
the distance to the battery. The DC cable length from the
charger, with either the battery clamp or eyelet terminal
connectors, is approximately 75-inches (1900mm).

Charging Modes.

Standby, 12V NORM, 12V COLD/AGM, 24V NORM,
24V COLD/AGM, 12V LITHIUM, 12V AGM+, 16V AGM,
16V LITHIUM, 13.6V SUPPLY and 12V REPAIR, plus
JumpCharge for engine starting. Some charge modes
must be pressed and held for three (3) seconds to enter
the mode. These "Press and Hold" modes are advanced
charging modes that require your full attention before
selecting. "Press and Hold" are indicated on the charger
by a red line. It is important to understand the differences
Phone: 1.800.456.6626
Email: support@no.co
30339 Diamond Parkway, #102
Glenwillow, OH 44139
United States of America
The NOCO Genius
Before using the charger, carefully
The G26000 has four (4) external holes for
The G26000 has eleven (11) modes:
G26000 represents
®