Getting Started; Charging Modes - NOCO Genius G7200 Betriebsanleitung

Contacting NOCO.
Mailing Address:
About G7200.
some of the most innovative and advanced technology
on the market, making each charge simple and easy. It is
quite possibly the safest and most efficient charger you
will ever use. The G7200 is designed for charging all types
of 12V lead-acid and 12V lithium-ion batteries, including
Wet (Flooded), Gel, MF (Maintenance-Free), CA (Calcium),
EFB (Enhanced Flooded Battery), AGM (Absorption Glass
Mat), and LIB (Lithium Ion) batteries. It is suitable for
charging battery capacities from 14 to 230 Amp-Hours and
maintaining all battery sizes.

Getting Started.

read the battery manufacturer's specific precautions and
recommended rates of charge for the battery. Make sure
to determine the voltage and chemistry of the battery by
referring to your battery owner's manual prior to charging.
Mounting.
mounting. Mount the charger in a desired location with
#6 self-drill screws. Make sure there are no obstructions
behind the mounting surface. It is important to keep in mind
the distance to the battery. The DC cable length from the
charger, with either the battery clamp or eyelet terminal
connectors, is approximately 75-inches (1900mm).

Charging Modes.

Standby, 12V NORM, 12V COLD/AGM, 24V NORM, 24V
COLD/AGM, 12V LITHIUM, 12V AGM+, 13.6V SUPPLY,
and 12V REPAIR. Some charge modes must be pressed
and held for three (3) seconds to enter the mode. These
"Press and Hold" modes are advanced charging modes
that require your full attention before selecting. "Press
and Hold" are indicated on the charger by a red line. It is
Phone: 1.800.456.6626
Email: support@no.co
30339 Diamond Parkway, #102
Glenwillow, OH 44139
United States of America
The NOCO Genius
Before using the charger, carefully
The G7200 has four (4) external holes for
The G7200 has nine (9) modes:
G7200 represents
®