pyrexx PX-I Betriebsanleitung Seite 34

In addition, build-up of fire residues
(e.g. soot), as well as nicotine and grease
deposits, which have caused a readily
detectable discolouration of the device,
are categorized as contamination, which
means the loss of any warranty claims.
Especially nicotine and grease condensates
do not only gather on the outer surface
of the device, but also accumulate on the
surfaces of the optical measuring compo-
nents. Particularly there, the adhesion of
condensates leads to premature deteri-
oration of the optical properties of the
measurement components, which the de-
vice can compensate through autonomous
recalibration only within its physical limits.
Moisture damage / corrosion
If the device, and in particular its elec-
tronics, are damaged by moisture of any
kind, any warranty claim shall be forfeited.
Moisture thus is not only the exposure to
fluid, but also regular, above-average ex-
posure of the device to humidity (> 70%).
Due to the effect of excessive humidity
34
Downloaded from www.Manualslib.com
Operating Manual: PX-1 - Smoke Alarm Device
manuals search engine
(e.g., steam / roasting fumes), the battery
of the device is discharged above average,
and the battery life is shortened consid-
erably. Also, liquids and high humidity can
damage the electronics of the device by
causing corrosion.
Thermal damage
If the device has been exposed temporari-
ly or permanently to a temperature below
0° C or above 70° C, any warranty claim
shall be forfeited. In particular, no warranty
shall be given for devices that were ex-
posed to high temperatures and fumes in
a fire. Damage to the device as a result of
frost / cold, as well as heat damage, shall
not be covered by the warranty.
Excessive load on the battery
Excessive load on the battery capaci-
ty through frequent triggering of alarm
tones (more than once a month) may
lead to premature consumption of the
battery capacity due to the related bat-
tery consumption and to the loss of any
warranty claims.
EN