Before First Use; Water Hardness - Electrolux ESF 6610ROW Benutzerinformation

28 www.electrolux.com

6. BEFORE FIRST USE

Downloaded from www.Manualslib.com
There is also an acoustic signal that oper-
ates when the programme is completed.
By default, this acoustic signal is off, but it
is possible to activate it.
How to activate the acoustic signal
for the end of programme
1. Press the on/off button to activate the
appliance.
2. Press and hold, at the same time,
Program and TimeSaver for a few
seconds.
3. Press and hold, at the same time, De-
lay and Option until the indicators
, and start to flash.
1. Make sure that the set level of the wa-
ter softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
6.1 Adjusting the water softener

Water hardness

German French
degrees degrees
(°dH)
51 - 70 91 - 125
43 - 50 76 - 90
37 - 42 65 - 75
29 - 36 51 - 64
23 - 28 40 - 50
19 - 22 33 - 39
15 - 18 26 - 32
11 - 14 19 - 25
4 - 10 7 - 18
< 4
manuals search engine
4. Press Delay,
5. Press Delay to change the setting.
6. Press the on/off button to deactivate
5. Processing residues can stay in the
mmol/l
(°fH)
9.1 - 12.5
7.6 - 9.0
6.5 - 7.5
5.1 - 6.4
4.0 - 5.0
3.3 - 3.9
2.6 - 3.2
1.9 - 2.5
0.7 - 1.8
< 7 < 0.7
• The indicators
and
• The indicator
continues to flash.
• The display shows the current set-
ting.
Acoustic signal on
Acoustic signal off
the appliance and to confirm the set-
ting.
appliance. Start a programme to re-
move them. Do not use detergent and
do not load the baskets.
If you use the combi detergent
tablets, activate the Multitab op-
tion.
Water softener
adjustment
Clarke Manual
degrees
64 - 88 1)
2
53 - 63 1)
2
1)
46 - 52
2
36 - 45 1)
2
1)
28 - 35
2
23 - 27 1)
2
18 - 22 1
13 - 17 1
5 - 12 1
< 5 2)
1
go off.
Elec-
tronic
10
9
8
7
6
1)
5
4
3
2
2)
1