Manual Adjustment; Electronic Adjustment - Electrolux GA60GLI222 Benutzerinformation

You must adjust the water soften-
er manually and electronically.

Manual adjustment

Electronic adjustment

1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to "Set-
ting and starting a programme".
2. Press and hold, at the same time,
and until the indicators
and
3. Press Cancel.
•
The indicators
off.
6.2 Filling the salt container
,
start to flash.
and go
Turn the water hardness dial to the posi-
tion 1 or 2.
•
The indicator
• The display shows the current set-
ting of the water softener, e.g.
= level 5.
4. Press Cancel again and again to
change the setting.
5. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
1. Turn the cap counterclockwise and
open the salt container.
2. Put 1 litre of water in the salt contain-
er (only for the first time).
3. Fill the salt container with dishwasher
salt.
4. Remove the salt around the opening
of the salt container.
5. Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it,
after you fill the salt container,
start a programme.
ENGLISH 57
continues to flash.