Daily Use; Setting And Starting A Programme - Electrolux ESF 6610ROW Benutzerinformation

30 www.electrolux.com

7. DAILY USE

Downloaded from www.Manualslib.com
6.3 Filling the rinse aid dispenser
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill the
rinse aid dispenser.
7.1 Using the detergent
A B
30
20
7.2 Setting and starting a
programme
The Auto Off function
To decrease the energy consumption, this
function automatically deactivates the ap-
pliance a few minutes after:
manuals search engine
1.
A B
2.
3.
A
-
+
4.
C
D
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
1.
2.
3.
A
-
+
4.
C
5.
• You have not closed the door to start
• The programme is completed.
Starting a programme without
delay start
1. Open the water tap.
Press the release button (D) to open
the lid (C).
Fill the rinse aid dispenser (A), no
more than the mark 'max'.
Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
Close the lid. Make sure that the re-
lease button locks into position.
You can turn the selector of the
released quantity (B) between po-
sition 1 (lowest quantity) and posi-
tion 4 (highest quantity).
for the type of load and the degree of
soil.
Press the release button (B) to open
the lid (C).
Put the detergent in the compartment
(A) .
If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appli-
ance door.
If you use detergent tablets, put the
tablet in the compartment (A).
Close the lid. Make sure that the re-
lease button locks into position.
the programme.