Silvercrest SFT 81 Gebrauchsanleitung Und Sicherheitshinweise Seite 64

Then release the
MEASURE button
.
5
The measured value
appears on the display
and the end of the
measuring process is indicated by a short beep
(when the key tone is activated). When the meas-
urement type symbol stops flashing, the next
measurement can be taken. This takes approx.
5 seconds.
If the measured value lies within the normal range
(<38°C / 100.4°F), the LED above the display
lights up green for 3 seconds. If the measured
value is higher than this (≥ 38°C/100.4°F = fe-
ver), the LED will light up red.
If you have activated Bluetooth data transfer, the
®
data will be transferred after the measurement.
The thermometer displays the symbol for Bluetooth
®
during transfer.
Note: The "HealthForYou" app must be activated
for transfer to occur. If the current data is not dis-
played on your smartphone, repeat the transfer
process as described in the chapter "transferring
measured values".
The device will switch off automatically after 60
seconds (if no Bluetooth connection is available)
®
or press the ON / OFF / MEASURE button
8
for 5 seconds to switch it off.
64 GB/IE