Displaying Saved Measured Values - Silvercrest SFT 81 Gebrauchsanleitung Und Sicherheitshinweise

The device will switch off automatically after 60
seconds (if no Bluetooth
or press the ON / OFF / MEASURE button
for 5 seconds to switch it off.
Please note that the displayed temperature is the
temperature which has been determined and is
not the adjusted surface temperature. It cannot be
compared with the forehead / ear temperature.

Displaying saved measured values

The device saves the measured values of the last 30
measurements automatically. If the 30 memory spaces
have been exceeded, the respective oldest measured
value will be deleted.
The saved measured values can be requested as
follows:
To switch on the multi-function thermometer, press
the ON / OFF/ MEASURE button
second.
Press the M button
will appear on the display.
If you have activated Bluetooth
data will be transferred after the measurement. The
thermometer displays the symbol for Bluetooth
during transfer.
Note: The "HealthForYou" app must be activated
for transfer to occur. If the current data is not dis-
played on your smartphone, repeat the transfer
70 GB/IE
connection is available)
®
. The last measured value
7
data transfer, the
®
8
for one
8
®