Inserting / Replacing Batteries - Silvercrest SFT 81 Gebrauchsanleitung Und Sicherheitshinweise

Inserting / Replacing batteries

Before replacing the battery, ensure that the device
has been switched off.
When the batteries become weak, the battery warning
symbol will appear on the display
measurements will still be possible but the batteries
will have to be replaced as soon as possible.
If the battery warning symbol
"Lo" flash on the display, the batteries must
be replaced immediately. If the batteries
are too weak, the thermometer will switch
off automatically.
Replace the batteries as follows:
Remove the battery
cover .
3
Remove the empty batteries
from the battery compartment.
Insert the new batteries into
the battery compartment un-
til they audibly and noticeably
click in. Ensure the correct polarity (+/-) of
the batteries.
Reattach the battery cover
compartment.
. Temperature
and
to the battery
3
GB/IE 57